Bullseye Software Cronus
Click Here ---> https://blltly.com/2tnK3p
i. after the software has finished installing and rebooted your cronus controller, you should be able to open the "usb/joystick settings" found within the "controller settings" tab. this will show all the connected devices, including the cronus device.
j. find the cronus controller in the device listing and double click it to start the configuration. this will begin the setup process. press buttons 1-9 in order to set up the device. the first three are used to configure the device. for a detailed description, read the "cronus device configuration guide" or refer to your own device manual.
k. the last step is to calibrate the device. this is normally done automatically when you first connect the device, however, if you have problems then calibrate the device using the following steps. press buttons 2, 1, 3, 4, 5, 6, 7, 8, 9 to calibrate the device. for a detailed description, read the "cronus device calibration guide" or refer to your own device manual.
a. gdb (game database) will be updated. this is required to get the controller working with your games. if you have any problems after completing the setup, contact support. if you can not find a support number, please email cronus support at support@cronus.co.uk
b. cronus will log into your account to link the controller. you will be asked to confirm that you have setup cronus and that you wish to link the controller. if you are using a ps3 controller, you should now be able to use it on xbox 360 as the setup process has already been completed. if you are using a pc controller, you should now be able to use it on ps3 and xbox 360. enjoy! 3d9ccd7d82